Detailed Product Description

Remove Cartridge Cover

Use utility knife or special tool to open the cartridge cover

Insert Inkjet Cartridge

Insert the nozzle part of the cartridge into the refill clip and push the top of the cartridge all the way in until you hear it clicking into place

Refilling Ink

1. Insert the injection needle deep into the injection inlet, pull up about 5mm and slowing inject around 15-30ml of ink
2. Pull up the inkjection needle about 5mm backward,and then slowly inkject appropriate ink.Repeat inkjection for each color
3. Warning: The ink volume specified above is for a completely empty cartridge

Stabilize Internal Pressure

1. Connect the syringe to the rubber hole of the refill clip, and slowly suck out internal air until 1ml of ink is filled in the syringe
2. Remove the cartridge from the refill clip and clean the excessive ink around the nozzle, dabbing the nozzle part on soft tissue
3. Reseal the cartridge cover  with tape
4. Install the cartridge into the printer, and run head cleaning process before use