Detailed Product Description

Get Ready

1. For HP cartridges, tear off  the lable on the ink cartridge to check the ink iniection inlet
2. For LEXMARK BLACK cartridge, use drill tool to eniarge refill hole
3. For LEXMARK COLOR cartridge, use utill knife or specific tool to open the cartridge cover
4. Attention: Mark sure the RED rubber pad is inserted for HP cartridges, and the BLUE rubber pad for Lexmark cartridges

Insert Inkjet Cartridge

Insert the nozzle part of the cartridge into the refill clip and push the top of the cartridge all the way in until you hear it clicking into place.

Refilling Ink

1. Insert the injection needle deep into the ink injection inlet of the specific color , with the needle directed towards the nozzle
2. Pull up the injection needle about 5mm backward , and then slowly inject appropriate ink. Repeat injection for each color
3. Warning: The ink volume specified above is for a completely emply cartridge.

Stabilize Internal Pressure

1. Connect the syringe to the rubber hole of the refill clip, and slowly suck out internal air until 0.5ml of ink is filled in the syringe
2. Remove the cartridge from the refill clip and clean the excessive ink around the nozzle, dabbing the nozzle part on soft tissue
3. Install the cartridge into the priter, and run head cleaning process before use