Detailed Product Description

Insert Inkjet Cartridge

Insert the nozzle part of the cartridge into the refill clip and push the top of the cartridge all the way in until you hear it clicking into place.

Remove Inlet Covet for BC-02/BX-2

Use the supplied gimlet to drill into the inlet cover at the side of the cartridge. And remove it to

create an ink injetction inlet.

Pushing In Metal Ball for BC-03/BX-3

Use the pushing pin/gimlet to push in the metal ball on the side of the cartridge to create an ink injection inlet.

Refilling Ink

1. Insert the injection needle deep into ink injection inlet of the specific color, with the needle directed towards the nozzle
2. Pull up the injection needle about 5mm backward , and then slowly injet around 15ml ink
3. Warning: The ink volume specified above is for a completely empty cartridge

Stabilize Internal Pressure

1. Connect the syringe to the rubber hole of the refill clip, and slowly suck out internal air until 0.5ml of ink filled in the syinge
2. Remove the cartridge form the refill clip and clean the excessive ink around the nozzle, dabbing the nozzle part on soft tissue
3. Install the cartridge into the printer, and run head cleaning process before use