Detailed Product Description

Compatible cartridges

1. PG-40 PG-50 PG -830 CL-41 CL-51 CL-52 CL -831
2. Attention:The BLACK rubber pad is inserted for the black cartridge .the RED rubber pad is for Magenta color of color cartridge,and blue rubber pad is for cyan and yellow color of color cartridges

Get ready

Tear off the label on the ink cartridge to check the ink injection inlet,please make sure the color of ink for each ink inlet

Insert inkjet cartridge

Insert the nozzle part of the cartridge into the refill clip and push the top of the cartridge all the way in intill youhear inclicking

Refilling ink

1. Insert the injection needle deep into the ink injection inlet of the specific color,with the needle directed towards the nozzle
2. Pull up the injection needle about 5m backward,and then slowly inject appropriate ink.Repeat injection for each color
3. Waring:The ink volume specified above is for a completely empty cartridge.

Stabilize internal pressure

1. Connect the syringe to the rubber hole of the refill clip,and slowly suck our internal air until 0.5ml of ink is filled in syringe
2. Remove the cartridge from the refill clip and clean the excessive ink around the nozzle,dabbing the nozzle part on soft tissue
3. Install the cartridge into the printer ,and run head cleaning process before use.